| | | |
|
|
|
|
|
Album: Plans and driver picturesDesign is copyright of Bob Brines, who is kind enough to share it with the diy community, visit his page at:
http://www.geocities.com/rbrines1 Changed: 01/27/04
Contains: 5 items. Viewed: 3839 times.
|
dry fitting of both speakers Viewed: 2241 times.
|
used a 1/4" on both sides of the window braces (baltic birch) Viewed: 1544 times.
|
inner front baffle: holes are much larger to allow for t-nuts to be attached to the outer front baffle piece, finished with a 1/2" roundover Viewed: 1354 times.
|
| | | |
| | | |
|
|
|
|
|
after biscuiting, top, bottom and inner front pieces are attached to the right side Viewed: 1486 times.
|
clamping on the window braces Viewed: 1353 times.
|
braces glued to speaker Viewed: 1591 times.
|
dry fitting the tl piece Viewed: 1451 times.
|
| | | |
| | | |
|
|
|
|
|
pieces all marked for biscuit cutting Viewed: 1265 times.
|
cutting holes for biscuits Viewed: 1305 times.
|
top and bottom are ready for gluing Viewed: 1385 times.
|
gluing second speaker Viewed: 1226 times.
|
| | | |
| | | |
|
|
|
|
|
adding braces on second speaker (20 clamps) Viewed: 1137 times.
|
both speakers, partially assembled Viewed: 1322 times.
|
clamping on the inner tl part Viewed: 1278 times.
|
putting on the back piece Viewed: 1222 times.
|
| | | |
| | | |
|
|
|
|
|
progression Viewed: 1912 times.
|
external front baffles Viewed: 2117 times.
|
gluing on bottoms Viewed: 1875 times.
|
gluing front baffle Viewed: 1513 times.
|
| | | |
1
