| | | |
|
|
|
|
|
drivers, waiting for cabinets to be finished Viewed: 3154 times.
|
cross sectional view of driver *Viewed: 3736 times.
|
Jim Griffin's Mini-Monitors that won the DIY2001 Atlanta Open Class Viewed: 5514 times.
|
initial assembly of cut pieces (not glued yet) Viewed: 3387 times.
|
| | | |
| | | |
|
|
|
|
|
putting together the first pieces Viewed: 2317 times.
|
back of baffle - 1/2" roundover on inside of mounting hole Viewed: 2854 times.
|
front of baffle - countersunk to make driver flush Viewed: 2954 times.
|
gluing on the front baffle Viewed: 2067 times.
|
| | | |
| | | |
|
|
|
|
|
Seeing how the drivers sound, with the backs clamped on. ported through the back by leaving a 1/2" gap on the bottom for the wires and porting. Great imaging from these JX92S, but not much bass yet. Box is not properly stuffed at this point. Viewed: 3474 times.
|
3dB baffle step compensation (mills 4 ohm and erse super q 1.5mH) 12ga teflon covered silver coated copper wire used for internal wiring Viewed: 3172 times.
|
clamping on the outer sides, letting glue dry overnight. Viewed: 2547 times.
|
assembled speaker, listening to music (top and bottom not glued on yet) Viewed: 2385 times.
|
| | | |
| | | |
|
|
|
|
|
rear, binding posts will eventually be installed where the wires are coming out, once the speaker is properly finished. Viewed: 2408 times.
|
another picture of interior Viewed: 3984 times.
|
gluing on the top piece Viewed: 2386 times.
|
gluing on the bottom piece Viewed: 1607 times.
|
| | | |
| | | |
|
|
|
|
|
rear view with double side thickness - back will be removable Viewed: 1981 times.
|
cardas copper binding posts that I will use for these speakers Viewed: 2636 times.
|
listening to fully assembled speakers Viewed: 2869 times.
|
started the roundover. I am rounding all sides but the back. I will eventually make stands that attach to the base. Viewed: 3316 times.
|
| | | |
1
